Home » Device: ispPAC-POWR6AT6-01 (ISP-VME) Device: ispPAC-POWR6AT6-01 (ISP-VME) Manufacturer: Lattice Part number description for this device: ispPAC-POWR XXXX - XX XX X X Move the cursor over the box to highlight particular section ispPAC-POWR Family Signature ispPAC-POWR = In-System Programmable Power Supply Monitoring,Sequencing and Margining ControllerLA-ispPAC-POWR = Automotive family, In-system programmablepower supply controller XXXX Device Number 1014 = no ADC1014A = ADC present XX Performance Grade 01 = Standard- for ispPAC-POWR1014/A and ispPAC-POWR1220AT801 = 6V to 10V HVOUT02 = 6V to 12V HVOUT XX Package Type SN24 = 24 pin QFNS, Lead-FreeT, T44 = 44 pin TQFPT, T48 = 48 pin TQFPTN, TN44 = 44 pin Lead-Free TQFPTN, TN48 = 48 pin Lead-Free TQFPN32 = 32 pin QFNNN32 = 32 pin Lead-Free QFNT100 = 100 pin TQFPTN100 = 100 pin Lead-Free TQFPS32 = 32 pin QFNSSN32 = 32 pin QFNS, Lead-Free X Temperature Range I = IndustrialE = Automotive X Optional Suffix Blank = StandardN = Lead-free
Note: Part number description table describes usual part-numbering system for more chips, therefore this table can contain information, that might not be valid for the actually selected chip. The information here are provided on the best-effort basis and might be either inaccurate or incoplete. Therefore always check the latest datasheet of the chip for part number description detail. If you find some inaccuracy, let us please know.
go back to result page Supported by programmers and programming adapters/modules: BeeHive204 adapter/module: Note: via ISP connector BeeHive204AP adapter/module: Note: via ISP connector BeeHive208S adapter/module: Note: via ISP connector BeeProg2 adapter/module: Note: via ISP connector BeeProg2AP adapter/module: Note: via ISP connector BeeProg2C adapter/module: Note: via ISP connector BeeHive204AP-AU (discontinued) adapter/module: Note: via ISP connector
go back to result page